Hand Tools · Austin, Texas

Ten hand tools for small projects, none of them needing a manual to figure out.

A claw hammer, a crosscut saw, a wrench, a screwdriver set, a tape measure, a chisel set, a hand plane, a pair of clamps, a sledgehammer and a folding utility knife. That's the whole shelf. Every one is checked before it goes out and covered by the same one-year breakage guarantee as the rest of the catalogue — this is inquiry-only, so a phone call or the form below is how you get one, not a checkout page.

10 items in this range 1-year breakage guarantee Ships in 3 days from Austin

Bought once, used for years, not swapped out every spring

Hand tools for small projects don't need to be expensive to be right, but they do need to be the right weight and the right steel. The wood chisel set with beech handles on this shelf gets picked over cheaper sets for one reason: the high-carbon steel holds an edge through a whole cabinet job instead of rolling over on the second dovetail. We've pulled tools from this range before — a folding pruner from a different category came back with a snapped pivot pin by June, two years running, and it's gone. The same standard applies here: if it comes back broken more than once, it doesn't stay on the shelf.

The owner checks the handle-to-head fit on every hammer and the tine set on every chisel by hand before it goes out. That's not marketing language — it's the actual last step before a tool reaches the counter.

The range

Every item, its own spec, its own price basis

Ask about any item by phone or by the inquiry form further down the page. Prices shown are the starting price basis, not a binding quote.

Forged claw hammer with a hickory handle resting on a workbench

VX-HT-01

Claw Hammer, 16oz

Forged head, hickory handle, curved claw. Sixteen ounces is the weight that suits most jobs around a house — framing nails and picture hooks alike — without turning a wrist sore after an hour. Hickory flexes under a strike where a cheap fibreglass handle just transmits the shock straight to your elbow.

Specification
Head	Forged steel, 16oz
Handle	Hickory
Claw	Curved

from $19Starting price basis, confirmed when you ask.

Ask about this item

VX-HT-02

Hand Saw, 20in Crosscut

Impulse-hardened teeth that stay sharp longer than a set-and-file blade, so this one isn't a saw you re-sharpen every winter — you use it until the teeth are genuinely gone and then you replace it. Twenty inches is long enough for a stud wall cut and short enough to fit in most tool bags.

Specification
Teeth	Impulse-hardened, crosscut
Blade length	20in

from $17Starting price basis, confirmed when you ask.

Ask about this item

VX-HT-03

Adjustable Wrench, 10in

Drop-forged chrome vanadium with a wide jaw opening, built for the odd-sized nut a fixed spanner set never seems to include. Ten inches gives enough leverage for a stuck garden tap fitting without needing a cheater bar.

Specification
Material	Drop-forged chrome vanadium
Length	10in

from $15Starting price basis, confirmed when you ask.

Ask about this item

VX-HT-04

Screwdriver Set, 6 Piece

Magnetic tips, acetate handles, slotted and Phillips in the sizes that actually turn up in flat-pack furniture and light switches — not a novelty set of thirty bits you'll use twice. The magnetic tip holds a screw steady one-handed in a socket you can't get your fingers into.

Specification
Tips	Magnetic, slotted and Phillips
Handles	Acetate
Pieces	6

from $22Starting price basis, confirmed when you ask.

Ask about this item

VX-HT-05

Tape Measure, 25ft

Nylon-coated blade so it survives being dropped on concrete more than a few times. Ask for the belt clip separately — it doesn't come with the case and we won't pretend it does. Twenty-five feet covers a room measurement without running out halfway across.

Specification
Blade	Nylon-coated, 25ft
Belt clip	Sold separately

from $11Starting price basis, confirmed when you ask.

Ask about this item

VX-HT-06

Wood Chisel Set, 3 Piece

High-carbon steel blades on beech handles, rolled into a leather case rather than rattling loose in a drawer. This is the set we mentioned above — the one that holds an edge through a real cabinet job instead of a single afternoon. Comes with the leather roll, not a cardboard sleeve that falls apart in a toolbox within a month.

Specification
Blade steel	High-carbon
Handles	Beech
Case	Leather roll, 3 pieces

from $28Starting price basis, confirmed when you ask.

Ask about this item

VX-HT-07

Hand Plane, No. 4

Cast iron body with an adjustable throat, sold ready to hone rather than claiming to be sharp out of the box — no plane is, and anyone who tells you otherwise hasn't used one. This is the size that suits general smoothing work: door edges, a tabletop, a warped board that needs flattening before it gets glued into anything.

Specification
Body	Cast iron
Throat	Adjustable
Condition	Ships ready to hone

from $44Starting price basis, confirmed when you ask.

Ask about this item

VX-HT-08

Bar Clamp, 12in, Pair

Quick-release trigger, 300lb clamping force, sold as a pair because one clamp on its own rarely holds a glue-up square. Twelve inches is the reach that covers most furniture repair and small joinery without needing a second set for the same job.

Specification
Release	Quick-release trigger
Clamping force	300lb
Reach	12in, sold as a pair

from $19Starting price basis, confirmed when you ask.

Ask about this item

VX-HT-09

Sledgehammer, 4lb

Fiberglass handle, forged head, rubber grip collar to take the sting out of a missed swing. Four pounds is light enough for fence-post work and breaking up a small slab without needing to brace against a wall between swings.

Specification
Head	Forged steel, 4lb
Handle	Fiberglass, rubber grip collar

from $24Starting price basis, confirmed when you ask.

Ask about this item

VX-HT-10

Utility Knife, Folding

Locking blade, belt clip built in, five spare blades included in the box so it's not a knife you need to buy accessories for right away. Folds closed for the toolbox or a jacket pocket, which the fixed-blade version on some shelves elsewhere doesn't allow.

Specification
Blade	Locking, folding
Spare blades	5 included
Clip	Built-in belt clip

from $9Starting price basis, confirmed when you ask.

Ask about this item

How an inquiry turns into a tool in your hand

Call, email, or use the form below. Tell us the item, and the size or reach if it matters — clamp length, blade length, saw length.
We confirm what's on the shelf. Most of this range sits in stock in Austin; anything low gets a real reorder date, not a guess.
You get a price basis and a total. No payment happens through this site — it's settled when you collect or when the order ships.
Ships in three days from Austin, or we call you and say why not.

Who this shelf is not for

If you're outfitting a full job-site crew with matching tool sets, a trade supplier will get you a bulk rate we can't match at this size — we're a forty-item shop, not a wholesaler. What we're good for is the tool a household actually reaches for: the one hammer, the one wrench, the chisel set that gets used twice a year and still needs to work properly both times.

Ready to ask about stock or a size?

Send an item inquiry with the item name, and we'll reply with real stock and a price basis — usually the same afternoon.

Send an item inquiry Look up by model or part

Ten hand tools for small projects, none of them needing a manual to figure out.

Bought once, used for years, not swapped out every spring

Every item, its own spec, its own price basis

How an inquiry turns into a tool in your hand

Who this shelf is not for

Ready to ask about stock or a size?

The rest of the catalogue